DC brushless micro motor

DC brushless micro motor 1.Factory price and good quality 2.930-2200KV 3.Weight:50g

DC brushless micro motor

Brushless DC motors were developed from conventional brushed DC motors with the availability of solid state power semiconductors

The commutation function may be performed by various shaft position sensors: optical encoder, magnetic encoder (resolver, synchro, etc), or Hall effect magnetic sensors. Small inexpensive motors use Hall effect sensors. (Figure below) A Hall effect sensor is a semiconductor device where the electron flow is affected by a magnetic field perpendicular to the direction of current flow.. It looks like a four terminal variable resistor network. The voltages at the two outputs are complementary. Application of a magnetic field to the sensor causes a small voltage change at the output. The Hall output may drive a comparator to provide for more stable drive to the power device. Or, it may drive a compound transistor stage if properly biased. More modern Hall effect sensors may contain an integrated amplifier, and digital circuitry. This 3-lead device may directly drive the power transistor feeding a phase winding. The sensor must be mounted close to the permanent magnet rotor to sense its position.

Technical parameters

Model	KV	Weight	Motor size	Shaft size	Propeller	Voltage Range	Standby current	Max current	Max power	Max torque
A2826-6	2200	50g	Φ27.7*26.3mm	Φ3.17*37mm	7*4/7*3	7.4-11.1V/2-3S LiPo	1.8A	31.5A	342watt	960g
A2826-10	1400				9*4.7/7*4		0.9A	18.9A	205watt	680g
A2826-13	1000				11*7/10*5		0.5A	13.8A	150watt	660g
A2826-15	930				12*6/10*7		0.4A	12A	130watt	645g

Φ

DC brushless micro motor